The version of the Blue Jay that can program the outputs to fire e-matches before apogee, for multi-stage flights.
500 Hz 3-axis High-Range Accelerometer, +/- 400 Gs
TeleBT provides the equivalent of a TeleDongle, with both USB and Bluetooth for connection to the ground station computer or mobile device.
The RF filter components are set for use in the vicinity of 435 Mhz.
The magnetic switch is reliable and easy to use in any rocket installation without needing any exterior holes to be drilled or aligned.
1" 500 Hz 3-axis High-Range Accelerometer, +/- 400 Gs
3D Printed Bidirectional Transition for BT-70 and BT-80 with Avionics Bay
The Blue Jay 2 altimeter is the easiest rocketry altimeter to install and use.
This board provides two programmable timer-based pyro channels with tilt limits. It is the same size and shape with the same connector layout as our EasyMini flight computer.
Featherweight Tracker Battery 400mAhr
Introducing our Rocket-Inspired T-Shirt: You know what I say.. Launch another rocket!
Featherweight Dual Battery Charger
MicroSplash is a barometric logging altimeter for precision model rocketry altitude measurements, that weighs less than 2 grams including the battery!.
The hardware is identical to MicroPeak, but this version has firmware that is optimized for use with water rockets, with a more sensitive boost detect of 10m instead of the 30m used by MicroPeak.
This kit provides students hands-on engineering experience while they learn how to design rockets, without the worry of finding a launch field. Through learning concepts such as center of gravity and center of pressure, students will put their problem-solving skills to the test as they attempt to build a stable rocket and test it with the Estes Rocket Holder.
0-1600 psi pressure sensor, with "Buick" style connector and analog output.
These sensors take 5V DC in and give an analog voltage out that ranges from 0.5 volts at 0 psi to 4.5 volts at the full scale of 1600 psi. The sensor body is stainless steel, and the input fitting is a male boss threaded 1/8 inch NPT. These sensors are ideal for use in high power rocket motor characterization, and directly connect to our motor characterization boards.
This board is designed for in-flight characterization of research rocket motors. It records chamber pressure and acceleration to an on-board flash memory chip, the contents of which can be downloaded after flight over USB.
Featherweight 915 MHz Antenna
Featherweight Tracker Battery 1200 mAhr
Provides a built-in connector for your Raven. Just tighten the Raven's screw terminals, plug in the battery, and the electrical connections are done!
Get ready to launch your new rocket with the reliable Electron Beam® Launch Controller.
A GREAT combo! A GREAT price! Launch Pad and Launch Controller included!
2230 E Launch Controller is a must when launching “E” engine powered rockets but can be used to launch all Estes engines.
Model Rocket Display stand for all of your mini engine size model rockets!
3 to a pack. What a great value!
Porta-Pad E launch pad requires no glue or tools.
Quick assembly and includes 1/4 in. (6 mm) launch rod!
Launch rod with extra strength and length for larger rockets.
New blast deflector plate.
