EasyMini is a small, low-cost, dual-deploy rocketry altimeter using just a barometry pressure sensor.
TeleMega is a high-end flight computer with 6 pyro channels, tilt limits, more and better sensors, GPS, and RF telemetry link.
$6.95 flat rate shipping. Select "Pickup at Launch" and shipping will be billed separately.
MicroPeak is a rocket altimeter that is both precise and tiny, designed to be the ideal altimeter for model rocket contests.
This is a recording dual-deploy altimeter for high power model rocketry with integrated GPS and telemetry link.
TeleBT provides the equivalent of a TeleDongle, with both USB and Bluetooth for connection to the ground station computer or mobile device.
The RF filter components are set for use in the vicinity of 435 Mhz.
This is a high-end recording dual-deploy altimeter for high power model rocketry. The feature set is identical to TeleMega, but without the integrated GPS and telemetry link. This makes EasyMega an ideal choice for complex projects including sustainers on multi-stage projects where integrated radio functionality isn't needed. 4 of the 6 pyro events are configurable and can be based on time and various flight events and status, including angle from vertical.
TeleGPS is a GPS tracker and logger.
TeleMini is a recording dual-deploy altimeter for model rocketry with telemetry link.
Please note that this board requires a 1S LiPo battery with appropriate JST connector for operation. To ensure proper voltage and polarity, and to avoid unexpected resets during pyro events, we strongly suggest you buy an Altus Metrum battery for use with TeleMini!
The currently shipping version is TeleMini v3.0.
The MicroPeak USB Interface board provides a way to capture MicroPeak flight logs over a USB connection to a computer running Linux, Mac OS or Windows.
This board provides two programmable timer-based pyro channels with tilt limits. It is the same size and shape with the same connector layout as our EasyMini flight computer.
MicroSplash is a barometric logging altimeter for precision model rocketry altitude measurements, that weighs less than 2 grams including the battery!.
The hardware is identical to MicroPeak, but this version has firmware that is optimized for use with water rockets, with a more sensitive boost detect of 10m instead of the 30m used by MicroPeak.
0-1600 psi pressure sensor, with "Buick" style connector and analog output.
These sensors take 5V DC in and give an analog voltage out that ranges from 0.5 volts at 0 psi to 4.5 volts at the full scale of 1600 psi. The sensor body is stainless steel, and the input fitting is a male boss threaded 1/8 inch NPT. These sensors are ideal for use in high power rocket motor characterization, and directly connect to our motor characterization boards.
This board is designed for in-flight characterization of research rocket motors. It records chamber pressure and acceleration to an on-board flash memory chip, the contents of which can be downloaded after flight over USB.
This kit consists of 5 pieces each of
These batteries are approximately 0.2x1.0x1.4" (5.5x25x35mm), and weigh about 9.5g (0.33oz).
These batteries are approximately 4x15x30mm, and weigh 3.6g.
This is a battery clip with 12 inch (30.48cm) wire leads. If you want to attach a 9V alkaline battery to an EasyMini or other flight computer, this will do the trick.
You can buy 9V battery clips elsewhere, what makes these "interesting" is the long leads. You can trim them to fit in nearly any avionics bay design!
These batteries are approximately 0.25x1.2x2.0" (6x30x48mm), and weigh about 19g (0.67oz).
