4" 4.5-1 VK Filament wound fiberglass nose cone.4 Inch filament wound fiberglass Air-frame 16 inches4 Inch G12 Fiberglass Coupler 9 inches4 Inch G12 1 inch switch Band4 Inch G12 Fiberglass filament wound Air-frame 33 inches54mm Motor Mount G12 Fiberglass 8 G10 CNC machined Fiberglass 1/8" Thick Fins (4 Upper / 4 Lower)G10 Fiberglass Centering RingsCNC machined Stepped Fiberglass Av-bay lids
Standard Dual DeployPrecision routed fin slotsFlies on anything from an J to an LWeight aprox 9 LbAlmost 6 Feet TallAll Fiberglass design
PLEASE NOTE: this is an unpainted rocket. The tubing included in this kit is semi-transparent red and a black nose cone. In order to finish the rocket like the one in the photo, you will need to add a painted finish.
This kit is made to order will not ship immediately.
Motor Retainer Not Included.
Rocketry Warehouse kits include only the fiberglass components to complete your rocket and do not have instructions. You will need to add rail buttons, hardware and recovery components.
This rocket uses the RA54L2 Aeropack Retainer. (Please note that older version of this rocket may use a different retainer).
