FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant bonding like CA and there is no accelerator to speed it’s curing. To obtain a faster initial bond when bonding two pieces, FOAM-CURE™ can be applied to one piece and after the two are joined, they can then be pulled apart. After letting it air dry for about ten minutes, FOAM-CURE™ will act like a contact cement when the parts are rejoined, resulting in enough tack strength to allow the next steps of assembly. Full strength is reached in 10-12 hours.
The Sidekick cleverly combines two body tubes, two nose cones, and two sets of fins to produce one remarkable rocket! Clustered engine launches are spectacular, as are recoveries via twin 36-inch mylar streamers. Light up the sky with the dynamic dual delights of the Estes Sidekick!
The Orange Bullet is the first release in the Estes Designer Signature Series. This series will re-introduce lesser known classics and launch never-before seen designs by some of the most famous pioneers of the model rocket industry. The Introductory rocket was designed by none other than Vern Estes himself!
It’s not real, but it certainly looks like it could be! The Terra GLM represents the possible future of military ground launch vehicles. This easy-to-assemble model comes with parts pre-finished in a military color scheme – no sanding or painting required! Build and fly this model in the same day.
Over 21 inches tall. D engine powered! 15 inch parachute recovery.
A great Beginner kit that is hot in looks. Powered by Estes standard model rocket engines, this awesome rocket can go upwards of 1150 feet. Now that is high!
An upscale of the original, the Great Goblin lives up to its name, offering an experience that's both great in skill and great in fun. Its intermediate level demands a bit more finesse, making it the ideal step-up for those eager to expand their rocketry skills. With its carefully crafted design, this rocket is sure to bewitch hobbyists of all ages. Unleash the goblin within you and let the Great Goblin redefine your rocketry experience. With a touch of enchantment and a dash of challenge, this rocket promises to take your hobby to new heights!
The Black Brant series represents the most successful group of sounding rockets ever launched! This Advanced 1:13 scale model rocket is a replica of the primary research vehicle produced by Canada Bristol Aerospace and is an excellent choice for your first scale project. Construction is fairly simple with the high quality parts we’ve included. Great performance and really impressive flights!
There’s never been an Estes kit like this! Created for extreme attitudes, this high-flying two-stager can reach a record setting 3600 feet – that’s more than two-thirds of a mile! Includes a large payload section so you can send your high-altitude experiments aloft. And for safe returns, the two bright orange streamers are both easy to spot and designed to bring your rocket down quickly – don’t let this one drift away! A simple but rugged design means a fun build and you’ll be launching in no time.SO LONG – so high, so far, so fast and so much fun
From our Beginner line of model rockets, the Firehawk can reach heights of 550 feet on powerful Estes mini engine. Comes with all pre-colored parts so no painting is required!
Super-Gold+ is a gap filling, medium viscosity foam-safe cyanoacrylate glue that is (nearly) odorless, and does not frost nearby surfaces as it cures. Curing time is 2 or 3 seconds longer than traditional CA glues of similar viscosity, but the slower cure time and different formulation prevent the sudden heating that can damage foam surfaces as CA glue cures. You can use Insta-Set CA Glue Acclerator in a very fine mist, but do not apply too much accelerator, or you may damage foam surfaces.
Standard engine powered and impressive on the launch pad! A “must-have” rocket to be added to your collection!
Recreate the excitement of the early days of NASA with this stunning 1:34 scale replica of Mercury Redstone (MR-4) and Gus Grissom’s Liberty Bell 7. The finished model stands nearly 29 inches tall with laser-cut, layered balsa fins. Topped with a detailed plastic scale model of the historic Mercury spacecraft.
Build and launch your own Mars Longship™ and follow the full story of the human exploration and settlement of the red planet in Estes® Destination Mars! Over 27 inches tall and powered by D and E engines, this detailed model is impressive on display and on the pad.
Mini engine powered, this sport scaled model of a U.S. battle field artillery missile features a detailed molded nose cone and laser cut wood fins.
A re-imagining of an Estes classic! Based on the Estes Gyroc of the 60s, the TAZZ is an awesome addition to any rocketeers collection. Launch it up to 700 feet on a C6-3 engine and watch as it spins back down to earth!
Conjure up some magical flights with your Wizard rocket! This magical wand of a rocket is an easy to build, high perfomance model. A great first or second kit that creates launch magic and fun!
What better way to present the inner workings of a rocket and to help explain how rockets work than the Phantom Display Model Rocket Kit.
Snakes won’t get close to this one! The Mongoose is a two stage rocket that builds into one over the top, high performance rocket! Soars to astonishing heights of over 1,600 feet using the Estes standard model rocket engines.
Talk about far-out fun! An Estes classic, the Der Red Max has a large stable design, giving great sport performance. A great addition to any rocket collection!
An awesome rocket from the Estes Space Corps line! The Corvette Class military craft has a sleek look and is sure to turn heads on the launch site.
