SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE™ and FINISH-CURE™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.
One of ever popular Ready to Fly rockets from Estes, the Athena is one cool rocket and comes fully assembled which means you get to the flying field quick. So grab a friend and get ready to have some fun!
LIMITED TIME! Quest Future Launch Vehicle Model Rocket Kit - Q3013
The Mars Ascent Vehicle (MAV) is the first rocket in the Estes Destination Mars series. A truly unique rocket, the MAV will keep you excited about the next steps to landing humans on Mars!
Lithium Polymer replacement battery for newer generation AltimeterOne, AltimeterTwo, AltimeterThree, and Chute Release
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. 1/2 oz (14.2 g)
The Sidekick cleverly combines two body tubes, two nose cones, and two sets of fins to produce one remarkable rocket! Clustered engine launches are spectacular, as are recoveries via twin 36-inch mylar streamers. Light up the sky with the dynamic dual delights of the Estes Sidekick!
Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. 1/2 oz (14.2 g)
A re-imagining of an Estes classic! Based on the Estes Gyroc of the 60s, the TAZZ is an awesome addition to any rocketeers collection. Launch it up to 700 feet on a C6-3 engine and watch as it spins back down to earth!
It’s not real, but it certainly looks like it could be! The Terra GLM represents the possible future of military ground launch vehicles. This easy-to-assemble model comes with parts pre-finished in a military color scheme – no sanding or painting required! Build and fly this model in the same day.
Build and launch your own Mars Longship™ and follow the full story of the human exploration and settlement of the red planet in Estes® Destination Mars! Over 27 inches tall and powered by D and E engines, this detailed model is impressive on display and on the pad.
MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.
Quick to build and fast off the pad, the Estes Illusion is gone in a flash! With swept back fins and a jet-fighter nose cone, the no-glue, snap-together Illusion look like it’s always moving! Flights to 1125 feet on an Estes C6-5 engine. No tricks here – the Illusion is the model rocket for you!
