LOC-I
If your display is cracked or damaged, you can snap in a replacement
Onebadhawk Harness 1/4" x 25ft Tubular Kevlar Harness with 3 sewn loops
FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant bonding like CA and there is no accelerator to speed it’s curing. To obtain a faster initial bond when bonding two pieces, FOAM-CURE™ can be applied to one piece and after the two are joined, they can then be pulled apart. After letting it air dry for about ten minutes, FOAM-CURE™ will act like a contact cement when the parts are rejoined, resulting in enough tack strength to allow the next steps of assembly. Full strength is reached in 10-12 hours.
Preorder Only; Aerotech lead time is over 4 weeks. AeroTech RMS-98/7680 Complete Motor Hardware Set - 9876M
Quest Q-Jet(tm) D16-6FJ Black Max Complete 2-Motor Launch Pack - Q6121
Super-Gold is a thin viscosity foam-safe cyanoacrylate glue that is (nearly) odorless, and does not frost nearby surfaces as it cures. Curing time is 2 or 3 seconds longer than traditional CA glues of similar viscosity, but the slower cure time and different formulation prevent the sudden heating that can damage foam surfaces as CA glue cures. You can use Insta-Set CA Glue Acclerator in a very fine mist to speed cure time, but do not apply too much accelerator, or you may damage foam surfaces.
A clear payload And a boosted rocket all in one! The super Nova is an Estes classic that has been brought back into the lineup of fine model rockets. The Super Nova has parachute recovery for the rocket and tumble recovery for the booster.
Mega-Magg
Onebadhawk Harness 3/8" x 25 Ft.ft Tubular Kevlar Harness with 2 sewn loops
2.26" Aerobee Hi
54mm to 38mm Motor Mount Adapter
