Quest SuperBird(tm) Model Rocket Kit - Q2010
Enerjet by AeroTech G-Force(tm) Mid-Power Rocket Kit - 89021
Quest Gamma-Ray Payloader(tm) Model Rocket Kit - Q2004
Thin Nomex Blanket - 2.6 to 3” Airframe chute protector
A GREAT combo! A GREAT price! Launch Pad and Launch Controller included!
When humanity returns to the moon, look for the Space Corps Lunar Scout to lead the way. Compact, easy to build, and constructed from laser-cut cardstock, this highly detailed rocket flies up to 200 feet on an Estes A10-0T engine and returns by tumble recovery – ideal for small fields!
FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant bonding like CA and there is no accelerator to speed it’s curing. To obtain a faster initial bond when bonding two pieces, FOAM-CURE™ can be applied to one piece and after the two are joined, they can then be pulled apart. After letting it air dry for about ten minutes, FOAM-CURE™ will act like a contact cement when the parts are rejoined, resulting in enough tack strength to allow the next steps of assembly. Full strength is reached in 10-12 hours.
Quick Assembly. Requires no glue or tools.
Not Included – 2220 Electron Beam Launch Controller
Onebadhawk Harness 3/8" x 30ft Tubular Kevlar Harness with 3 sewn loops
Super-Gold+ is a gap filling, medium viscosity foam-safe cyanoacrylate glue that is (nearly) odorless, and does not frost nearby surfaces as it cures. Curing time is 2 or 3 seconds longer than traditional CA glues of similar viscosity, but the slower cure time and different formulation prevent the sudden heating that can damage foam surfaces as CA glue cures. You can use Insta-Set CA Glue Acclerator in a very fine mist, but do not apply too much accelerator, or you may damage foam surfaces.
Onebadhawk Harness 1/4" x 25ft Tubular Kevlar Harness with 3 sewn loops
