We love PerfectFlite and what they have done for the hobby. Due to demand and limited production, PerfectFlite does not sell through dealers at this time.
Please order directly on the PerfectFlight website.
Smaller “Compact Footprint” version of the popular StratoLogger altimeter is about the size of two postage stamps!
Note: this is a preorder and will be shipped when the manufacturer resumes production.
A peanut-sized altimeter with super-sized features! This tiny, easy to use altimeter audibly reports your rocket's peak altitude and maximum velocity after flight via a sequence of beeps. A post-flight warbling siren sound makes finding small rockets in tall grass easier.
4" Super DX3 (tm)
The FireFly is a tiny, lightweight altimeter that reports the peak altitude and speed of your rocket's flight. Its high accuracy, low price, and ease of use make the FireFly ideal for rocketry education programs where precise, repeatable data is required on a limited budget. Each altimeter is individually calibrated for optimum accuracy, repeatability, and interchangeability.
AeroTech J435WS-13A 38mm x 356mm Single Use DMS 1-Motor Kit - 104314
One of our most extreme, super performance model rockets you can own and can easily be built in one afternoon. Estes standard model rocket engine powered.
4" Fiberglass Super DX3 (tm)
H14ST-P 29mm x 230mm single-use DMS Disposable Motor System, long burn solid composite propellant, high-power hobby rocket motor - A081400
AeroTech RMS-24/40 Complete Motor Hardware Set - 91241
For use with “M” or larger motors.
Approximate measurements: 1 1/4 inches long by 19/64 inch (.297) OD with 60-inch leads.
36.8 inches tall! E16-4 and F15-6 engine powered!
ATTENTION: Requires PS II Launch Base (3552) with 1/4″ launch rod or Porta-Pad E Launch Pad (2238) and E Launch Controller (2230) or Pro Series II Launch Controller (2240) with 30′ of wire – Sold Separately
Download Instructions
Upsized redesign of a classic kit! Ultra-realistic styling and spectacular parachute/glider dual recovery make this one a standout. Features laser-cut wooden components and a construction jig for speedy and accurate assembly. Two sheets of detailed, three-color decals complete the authentic look and feel of a future space liner. Launches up to 800 ft. on a recommended Estes C or D engine. The Estes Super Orbital Transport looks like the real thing and flies like a dream!
Quest SuperBird(tm) Model Rocket Kit - Q2010
The Mars Snooper is the perfect powerhouse model for exploring new worlds! Take this futuristic rocket to the launch pad and take to the skies on a D12-5 to soar up to 800 feet!
Super-Gold is a thin viscosity foam-safe cyanoacrylate glue that is (nearly) odorless, and does not frost nearby surfaces as it cures. Curing time is 2 or 3 seconds longer than traditional CA glues of similar viscosity, but the slower cure time and different formulation prevent the sudden heating that can damage foam surfaces as CA glue cures. You can use Insta-Set CA Glue Acclerator in a very fine mist to speed cure time, but do not apply too much accelerator, or you may damage foam surfaces.
AeroTech 3 Ounces Super Lube Grease Pack - 99217
Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. 1/2 oz (14.2 g)
Super-Gold+ is a gap filling, medium viscosity foam-safe cyanoacrylate glue that is (nearly) odorless, and does not frost nearby surfaces as it cures. Curing time is 2 or 3 seconds longer than traditional CA glues of similar viscosity, but the slower cure time and different formulation prevent the sudden heating that can damage foam surfaces as CA glue cures. You can use Insta-Set CA Glue Acclerator in a very fine mist, but do not apply too much accelerator, or you may damage foam surfaces.
A clear payload And a boosted rocket all in one! The super Nova is an Estes classic that has been brought back into the lineup of fine model rockets. The Super Nova has parachute recovery for the rocket and tumble recovery for the booster.
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. 1/2 oz (14.2 g)
